用于氫氣泄露檢測
For Hydrogen Leak Detection
用途：燃料電池車
Applications: Automobile - Fuel Cell
對象氣體：氫氣
Target gas: Hydrogen
FH2-HYO4是為了預防燃料電池汽車(FCV)的氫氣泄露而最新開發成功的氫氣傳感器模塊。這些應用需要用到一個可靠的氫氣傳感器，F(xiàn)IS以獨特的技術開發了這款催化燃燒式傳感器，擁有最低檢測量和寬幅表面面積。這款傳感器的研發成功，實現了快速響應和高耐硅混合物中毒的特性。這些功能實現了在各個應用場景下預期的超長壽命，可以長期使用不需要替換。把復雜的電子設計和軟件設計相結合，讓氫氣傳感器在檢測氫氣方面發揮了以下主要特性。
The FH2-HYo4 is a newly developed hydrogendetector, specifically designed for preventinghydrogen leaks in fuel-cell vehicles (FCV). For thisapplication, a reliable hydrogen sensors is requiredand FIS has developed a new catalytic combustiontype hydrogen sensor with a minimum mass andwide surface area using a unique technology.Thedevelopment of this sensor realizes a rapid responsespeed and strong poisoning resistance againstsilicone compounds. These features achieve theexpected demands for long life in actual applicationsin automobiles, without any need for replacingdetectors over a long period. In combination withsophisticated electronics and software design,FIS offers the following features in hydrogen leakdetection.
檢測濃度范圍： 0 ~ 4 vol.%
輸入電壓：12V (9 ~ 16V) DC
功耗： ≤1000mW
外部輸出： PWM
尺寸： 82.6 (W) x 80.8 (D) × 22.5 (H) mm
IP 保護等級： IP6K7
重量：58g
Measurement range: 0 ~ 4 vol.%
Supply voltage: 12V (9 ~ 16V) DC
Current consumption: ≤1000mW
Signal output: PWM
IP code: IP6K7
Size: 82.6 (W) x 80.8 (D) × 22.5 (H) mm
Weight: 58g
