G4Plus IR 紅外光譜的吸收特性進行濃度測量，無氧氣依賴性和催化傳感器的中毒現象，壽命長，準確紅外氣體傳感器是基于 NDIR 原理設計的智能微型氣體傳感器，它利用氣體對特定度高，性能穩定。該傳感器具有模擬和數字兩種信號輸出接口，能直接輸出經線性化處理和溫度補償?shù)臍怏w濃度值信號，更易于使用。
The G4Plus IR infrared gas sensor is an intelligent miniature gas sensor designed based on the Non-Dispersive Infrared (NDIR) principle. It measures gas concentration by utilizing the absorption characteristics of gases at specific infrared wavelengths, with no reliance on oxygen and immunity to poisoning issues common in catalytic sensors. It boasts a long lifespan, high accuracy, and stable performance. The sensor features both analog and digital signal output interfaces, directly providing linearized and temperature-compensated gas concentration signals, making it even easier to use.
特點
? 分辨率更高 ( 相較于 G4)：
0-5%vol： 0.01%vol 5-100%vol： 0.1%vol
0-100%LEL： 0.5%LEL
0-5000ppm： 10ppm
? 響應時間更快 ( 相較于 G4)
? 長期性能更穩定 ( 相較于 G4)
? 全量程溫度補償
? 寬溫度工作范圍：最寬可達 -40 – 70℃
? 兩種輸出模式：
數字量輸出：浮點數輸出
模擬量輸出： 0.4 – 2V
? 不會出現催化傳感器的“中毒現象”
? 無氧氣依賴性
? 本安防爆
用途 / Applications
G4P器滿足《紅外氣體傳感器用于測量甲烷、二氧化碳、六氟化硫和碳?xì)錃怏w等的濃度。該傳感GB 15322 可燃?xì)怏w探測器》、《AQ6211-2008 煤礦用非色散紅外甲烷傳感器》和《能源電力、石油石化、煤礦巷道、瓦斯抽放等危險環境，及更多工業環境健康和安全監測。AQ1052-2008 礦用二氧化碳傳感器通用技術條件》等要求，可用于工業廠房、交通隧道、
The G4P infrared gas sensor is designed to measure the concentration of gases such as methane, carbon dioxide, sulfur hexafluoride, and hydrocarbons.Compliant with standards including GB 15322 (Combustible Gas Detectors), AQ 6211-2008 (Non-Dispersive Infrared Methane Sensors for Coal Mines), and AQ 1052-2008 (General Technical Requirements for Mining Carbon Dioxide Sensors), this sensor is suitable for hazardous environments such as industrial plants, traffic tunnels, energy and power facilities, petrochemical sites, coal mine tunnels, and gas drainage systems, as well as broader industrial health and safety monitoring applications.
